1). Phased Array Ultrasonic Testing (PAUT)
2). Time of Flight Diffraction Ultrasonic Testing (TOFD)
3). Ultrasonic Testing (UT)
4). Magnetic Particle Testing (MT)
5). Penetrant Testing (PT)
6). Radiography Film Interpretation (RTFI of Welds)
7). Eddy current Testing (ECT)
8). Visual Testing (VT)
Course Content:-
Materials, methods, compatibility of materials, application of materials, process of carrying out penetrant testing, viewing conditions, equipment requirement, equipment and safety aspects; practical exercises; methods of assessing sensitivity, intepretation and evaluation, reporting, instruction writing.
Course Duration: – 5 days
Course Objectives:-
To explain the basic principles of penetrant inspection methods
To carry out penetrant inspection using solvent-removable, water-washable and post-emulsifiable/removal processes
To write clear and concise inspection instructions and test reports
To meet syllabus requirements for ISO 9712 / ASNT Level 2
Certification / Awarding Body:- ISO 9712 / ASNT
Entry Requirements (For Examination):-
The minimum required duration of training, which includes both theoretical and practical elements, is: Level 2 – 40 hours.
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 – 4 Months.
Course Content:-
Principles of magnetism; magnetic fields; induction; permeability and reluctance; magnetisation; lines of force, methods of testing, viewing conditions, detecting media; interpretation and evaluation, acceptance levels; demagnetisation; practical exercises; methods of assessing sensitivity, reporting instruction writing.
Course Duration:– 5 days
Course Objectives:-
To explain the basic principles of magnetic particle inspection methods
To carry out magnetic particle inspection
To write clear and concise inspection instructions and test reports
To meet syllabus requirements for NDT Level 2
Certification / Awarding Body:- ISO 9712 / ASNT
Entry Requirements (For Examination):-
The minimum requried duration of training, which includes both theoretical and practical elements, is : Level 2 – 40 hours.
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 – 4 Months.
Course Content:-
Basic principles of sound; generation and detection of sound; behavior of sound in a material, factors affecting propagation of sound; the flaw detector, calibration blocks/DAC blocks; use of angled beam probes for weld scanning, calibration of equipment’s; welding processes and weld defects; practical exercises on test specimens containing simulated flaws; examination of parent plate, butt welds, interpretation and evaluation; instruction writing.
Course Duration :- 12 days
Course Objectives:-
To explain the theoretical background of the techniques
To calibrate ultrasonic equipment
To measure the thickness of steel plates and determine levels of attenuation
To locate and evaluate laminations
To select the correct type of probe to examine welded but joints in steel plate/pipes
To report on the location and size of defects in typical welded butt joints
To interpret code requirements
To meet the syllabus requirements for ISO 9712 / ASNT Level 2.
Certification / Awarding Body:- ISO 9712 / ASNT
Entry Requirements (For Examination):-
The minimum required duration of training, which includes both theoretical and practical elements, is : Level 2 – 80 hours.
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 – 12 Months.
Course Content:-
History of TOFD Development, TOFD Advantages and Limitations, Principles of TOFD, Principles of TOFD, Depth Calculation, Time Calculation, PCS Calculation, Types of TOFD Scan, Equipment Used In TOFD, Digitalization Principles, Equipment Requirements, TOFD Depth, Ring-Time Issues And Errors, Interpretation and Evaluation, Applications
Course Duration:- 14 days
Course Objectives:-
To explain the theoretical background of the techniques & the TOFD machine characteristics
To calibrate TOFD equipment (velocity, Wedge delay, Sensitivity, Encoder)
To Scan the plates and acquire the data
To locate and evaluate defects using TOFD
To select the correct type of probe/ machine parameters to examine welded butt joints in steel plate
To report on the location and size of defects in typical welded butt joints
To interpret code requirements
To meet the syllabus requirements for ISO 9712 / ASNT Level 2
Certification / Awarding Body:- ISO 9712 / ASNT
Entry Requirements (For Examination):-
The minimum required duration of training, which includes both theoretical and practical elements, is : Level 2 – 120 hours.
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 – 12 Months.
Course Content:-
Introduction in PAUT, Basic Principals of PAUT, Basic components of PAUT, PAUT Probe Characteristics, Types of PAUT Probes, Beam Shaping & Steering Dynamic Depth Forms, Digitization Principles, Types of Scans, PAUT machine familiarization, Development of Scan Plan, Data acquisition, Data Interpretation etc.
Course Duration :- 14 days
Course Objectives:-
To explain the theoretical background of the techniques
To explain the theoretical background of the techniques & the PAUT machine characteristics
To calibrate PAUT equipment (velocity, Wedge delay, Sensivity, Encoder)
To Scan the plates and acquire the data
To locate and evaluate defects using PAUT
To select the correct type of probe/ machine parameters to examine welded butt joints in steel plate
To report on the location and size of defects in typical welded butt joints
To interpret code requirements
To meet the syllabus requirements for ISO 9712 / ASNT Level 2
Certification / Awarding Body:– ISO 9712 / ASNT
Entry Requirements (For Examination) :-
The minimum required duration of training, which includes both theoretical and practical elements, is : Level 2 – 120 hours.
The minimum duration for experience prior to or following success in the qualification examination is : Level 2 – 12 Months.
Course Content:-
Welding processes and weld defects; properties of X- and gamma-rays; sensitometry; film selection; film processing and spurious indications; factors controlling contrast and definition; X- and gamma-ray equipment; ionising radiation hazards; regulations; use of screens and filters; selection of angle of aspect; image quality indicators; defect depth location; castings; reporting.
Certification / Awarding Body:- ISO 9712 / ASNT
Course Objectives-
To list radiographic techniques
To state origins of defects
To recognize and differentiate between film artefacts and defect indications
To interpret radiographs and to categories and size the defects
To meet the syllabus for ISO 9712 / ASNT Level 2
Course Duration :-
The minimum required duration of training, which includes both theoretical and practical elements, is: Level 2 – 40 hours.
Entry Requirements (For Examination) :-
The minimum duration for experience prior to or following success in the qualification examination is: Level 2 – 6 months.